Make Your Vessel Stand Out
Auckland Boat Signage & Marine Graphics
Yacht, launch, trailer boat or working vessel, clean fresh graphics add value and knock years off the look of a boat. We design, print and fit boat signage across Auckland and right around New Zealand, from a name on the transom to a full hull wrap.
Boat names and transom lettering in any font, size or finish you like. Registration and sail numbers. Racing stripes, hull graphics, partial and full boat wraps. Every job is cut or printed in marine-grade vinyl with a UV laminate over the top, so your decals stay sharp through salt, sun and speed instead of going chalky by the second season.
Built around your boat
At Grafix Wall Art we get that a boat is more than a way to get out on the water. It is where your weekends go, and it should look the part. Send us a photo of the vessel and roughly the feel you are after, and we will lay a few options up on it before anything gets cut. Gold leaf and metallics for a classic launch, something sharper and more modern for a newer hull, your call either way.
We are based in Auckland and work with owners across the Tamaki hardstands, Half Moon Bay, Westhaven and Gulf Harbour. Names and lettering can also be cut to size and posted anywhere in New Zealand, ready to apply.
Our Latest Boat Signage Projects
Auckland Boat Signage, Right by Half Moon Bay Marina
You’ll find us at 50 Argo Drive, a short run from the Half Moon Bay Marina hardstand and just along the road from Bucklands Beach Yacht Club. Handy if your boat is already out of the water.
Bring the vessel to us, or for names, lettering and smaller graphics we can come to you at the berth. We work with owners right across Bucklands Beach, Howick, Pakuranga and the eastern bays, and further afield to Westhaven and Gulf Harbour when the job calls for it.
Not in Auckland? Boat names and decals can be cut to your exact sizes and posted anywhere in New Zealand, ready to apply.
What We Can Do For Your Boat
From a simple name on the transom to a full hull transformation, we’ve got the marine-grade goods to match the vision. Here’s where we come in:
- Boat Names & Lettering: Custom fonts, finishes and sizes that give your vessel its identity — bold and brassy or clean and classic, the call’s yours.
- Transom Signage: Your name and home port across the stern, finished to turn heads as you pull into the marina.
- Hull Graphics & Stripes: Racing stripes, flashes and feature graphics that add pace and personality to the waterline.
- Full & Partial Wraps: Reinvent the whole boat or just a section — same crisp, weatherproof finish either way.
- Registration & Sail Numbers: Cleanly applied and laid out to spec, whether it’s a Yachting NZ sail number or numbers for your club.
- Commercial & Charter Branding: Logos, contact details and full livery for charter boats, fishing operations and working vessels that need to look the part on the water.
Why Choose Our Marine Signage?
- Durability Meets Design: We use marine-grade vinyl and stainless steel for long-lasting, weather-resistant results.
- Fully Customisable: Whether you prefer modern minimalism or classic flair, our designs are tailored to suit your boat and personal style.
- Expert Boat Craftsmanship: Each boat graphic is treated as a creative collaboration to make your boat a canvas of self-expression.
Boat Wraps & Hull Graphics
A wrap is the fastest way to change how a boat looks without going near a paint booth. Full colour, any design, and it comes off again when you are ready for something else. That last part matters more than people expect at resale time.
We do full wraps that cover hull, sides and transom, partial wraps for a feature panel or a bold flash down the waterline, and hull graphics like racing stripes and colour blocks that add pace without committing the whole boat.
Wrap or paint? A wrap is faster, reversible and easier to update. Paint is permanent and repairs differently. For most owners changing the look of a fibreglass hull, a wrap wins on cost and on flexibility.
Boat Names & Transom Lettering
Naming a boat is a serious business, and the lettering should look like you meant it.
We cut boat names and home port lettering in marine-grade vinyl, in any font, size, colour or finish you like. Gold leaf effect and metallics for a classic launch. Clean modern sans-serif for something newer. Outlines, shadows, drop shadows, script, whatever suits the vessel.
Transom lettering with the name and port of registry across the stern is the traditional layout. Names down the bow or along the topsides work too, and often read better from the water.
Not sure on the font? Tell us the name and roughly the feel you are after and we will send you a few options laid up on a photo of your boat.
Materials Built for Salt & Sun
New Zealand is hard on vinyl. High UV, salt spray, constant flexing and a hull that gets hot in the sun and cold in the water.
We use cast marine-grade vinyl with a UV laminate over the top, which is what keeps colour from going chalky in year two. Cast film conforms to curves and compound shapes without lifting at the edges, which is the difference between a wrap that looks right for years and one that starts peeling by the first haul-out.
Easy To Install
Nation Wide Installers
We accept Afterpay
Frequently Asked Questions
What are boat decals graphics?
Boat decal graphics are custom-designed vinyl stickers applied to the hull or body of a boat. Think bold names, sleek stripes, logos, or full wraps. Made from premium marine-grade vinyl, they’re waterproof, UV-resistant, and tough enough to take on salt spray, sun glare and general wear—so your branding or design stays crisp and eye-catching on the water.
Can boat decals be polished?
Yes, once the decals have properly cured (usually after 24–48 hours), you can gently polish over them. Just use a non-abrasive polish and a soft cloth to avoid damaging the edges. Polishing helps boost gloss and blend the decals seamlessly with the rest of your boat’s finish—keeping things slick without peeling.
How boat decals applied?
It starts with a squeaky-clean, dry surface. Align your design, peel the backing, and smooth it on carefully using a squeegee or cloth, working from the centre out to avoid bubbles. For lettering, a transfer tape ensures perfect placement. Once applied, let it cure for a day before hitting the water to make sure it adheres properly.
What are marine stickers for boats?
Marine stickers are heavy-duty vinyl decals made specifically for life at sea. Built to handle everything from sun and salt to rough waves, they’re perfect for registration numbers, names, branding, safety labels, and custom graphics. Laminated and waterproof, they offer a clean, professional finish that lasts season after season.
What kind of decals can be applied on a boat?
Just about anything you can imagine—registration numbers, sponsor logos, decorative stripes, hull wraps, or fully custom artwork. Whether you need basic compliance labels or want your boat to turn heads at the marina, we’ve got marine-grade vinyl options to suit every design and vessel type.
How do I look after my boat graphics?
Easy. Rinse with fresh water after time on the salt, wash with a mild soap and soft cloth, and avoid abrasive cleaners. That keeps everything crisp and bright for the long haul.
What types of boats do you work on?
All of them. Dinghies, runabouts, launches, yachts, jetskis and commercial vessels, if it floats, we can make it look the part.
